Product Introduction
The Tuya Zigbee COB CCT LED Strip Light is a smart flexible LED strip lighting solution designed for cabinets, wardrobes, shelves, furniture and interior decorative lighting.
The system combines a 12V COB LED strip, a Tuya Zigbee CCT controller and, depending on the selected kit, a compatible power supply. This configuration allows the strip to provide flexible linear illumination while giving users control over correlated color temperature through a Zigbee-based smart lighting system.
Unlike conventional single-color LED strips, the CCT configuration allows the lighting appearance to be changed between warm white, natural white and cool white. This makes the same lighting system adaptable to different furniture, retail and interior environments.
The COB LED structure is designed to provide continuous-looking linear illumination. The strip is flexible and cuttable, making it suitable for custom-length cabinet, wardrobe and furniture installations.
The product operates at DC12V, uses a 10mm-wide PCB and has a listed power of 8W. The current product specification lists a 120° beam angle and IP33 protection.
The product page also provides full-kit configurations from 1m to 10m. The 10m kit uses two 5m LED strips with a Zigbee controller, 5A power supply and 1-to-2 splitter cable.
H3 Design
The LED strip uses a flexible COB construction with a 10mm PCB width, allowing it to be installed along straight or curved furniture surfaces.
The COB LED arrangement is suitable for applications where a smooth linear appearance is preferred over visibly separated LED points.
The flexible structure can be cut according to the required installation length, making it suitable for:
- Cabinet interiors
- Wardrobe shelves
- Kitchen cabinets
- Display cabinets
- Furniture
- Shelves
- Counters
- Retail displays
- Interior decorative lighting
The smart controller is a compact 28 × 24 × 11.5mm Zigbee CCT controller with a 4-pin connector. The controller operates from DC5–24V, with a maximum output of 2A per channel and 5A total output.
H3 Main Features
COB LED Technology
The COB LED strip provides a continuous linear lighting appearance suitable for cabinet and furniture applications.
CCT Adjustable Lighting
The strip supports three main color-temperature ranges:
- Warm White: 3000–3200K
- Natural White: 4000–4500K
- White: 6000–6500K
This allows lighting color to be adjusted according to the application.
Tuya Zigbee Smart Control
The system uses a Tuya Zigbee CCT controller. A compatible Zigbee hub is required for pairing and smart control.
Flexible & Cuttable
The LED strip can be cut to suit different cabinet, wardrobe and furniture dimensions.
12V Low-Voltage Operation
The LED strip operates at DC12V, making it suitable for low-voltage interior and furniture lighting systems.
Multiple Length Options
The product can be supplied in configurations from 1m to 10m.
Full Kit Available
Depending on the selected length, the kit can include:
- COB LED strip
- Zigbee CCT controller
- Power supply
- Splitter cable for the 10m configuration
120° Beam Angle
The listed beam angle is 120°, suitable for general linear decorative and cabinet lighting.
IP33 Protection
The current specification lists IP33 protection, so this product should primarily be positioned for protected indoor applications rather than exposed outdoor installations.
H3 Application
The Tuya Zigbee COB CCT LED Strip Light is suitable for:
- Kitchen cabinet lighting
- Wardrobe lighting
- Cupboard lighting
- Shelf lighting
- Display cabinet lighting
- Furniture lighting
- Retail display lighting
- Showcase lighting
- Bedroom furniture lighting
- Living room decorative lighting
- Interior accent lighting
- Commercial interior lighting
- Hotel furniture lighting
- Restaurant interior lighting
- Smart-home lighting projects
The CCT adjustment function allows the same lighting system to create warmer or cooler lighting depending on the environment.
For example, warm white can be used for residential furniture and hospitality environments, while cooler white can be selected for retail displays or task-oriented interior areas.
H3 Size / Options
The product page supports full-kit configurations from 1m to 10m.
| Kit |
LED Strip |
Controller |
Power Supply |
| 1m Full Kit |
1m |
Zigbee CCT Controller |
1A |
| 2m Full Kit |
2m |
Zigbee CCT Controller |
2A |
| 3m Full Kit |
3m |
Zigbee CCT Controller |
2A |
| 4m Full Kit |
4m |
Zigbee CCT Controller |
Project configuration |
| 5m Full Kit |
5m |
Zigbee CCT Controller |
3A |
| 10m Full Kit |
2 × 5m |
Zigbee CCT Controller |
5A + 1-to-2 Splitter |
These package configurations are based on the current product page.
LED Strip Specifications
- Length: 1–10m
- PCB Width: 10mm
- Working Voltage: DC12V
- Listed Power: 8W
H3 Lighting Options
The CCT LED strip provides adjustable white lighting across three listed ranges:
Warm White
3000–3200K
Suitable for:
- Bedrooms
- Living rooms
- Wardrobes
- Residential furniture
- Hospitality interiors
Natural White
4000–4500K
Suitable for:
- Kitchens
- Offices
- Retail displays
- Showcases
- General interior lighting
Cool White
6000–6500K
Suitable for:
- Retail displays
- Commercial interiors
- Display applications
- Areas requiring a cooler visual appearance
The current page lists the lighting as CCT = Warm White / Natural White / White.
H3 Installation
The system should be installed as a low-voltage LED lighting circuit consisting of the LED strip, Zigbee controller and compatible power supply.
Typical installation steps:
- Measure the cabinet, wardrobe or furniture area.
- Select the appropriate strip length.
- Cut the LED strip at the designated cutting position if a shorter length is required.
- Mount the strip on the prepared surface.
- Connect the LED strip to the Zigbee CCT controller.
- Connect the controller to the compatible DC power supply.
- Connect the power supply to the AC input.
- Confirm that the Zigbee hub is connected to the smart-home system.
- Power on the LED strip.
- Enter the app and search for the Zigbee controller.
- Pair the controller with the Zigbee hub.
- Adjust the CCT setting through the compatible control system.
H3 Technical Specifications
| Specification |
Details |
| Product Type |
Tuya Zigbee COB CCT LED Strip Light |
| LED Type |
COB |
| Working Voltage |
DC12V |
| Listed Power |
8W |
| PCB Width |
10mm |
| Length |
1–10m |
| Light Type |
CCT Adjustable White |
| Warm White |
3000–3200K |
| Natural White |
4000–4500K |
| Cool / White |
6000–6500K |
| Beam Angle |
120° |
| Protection |
IP33 |
| Controller |
Tuya Zigbee CCT Controller |
| Controller Voltage |
DC5–24V |
| Controller Output |
Max. 2A/Channel; 5A Total |
| Controller Connector |
4 Pin |
| Controller Size |
28 × 24 × 11.5mm |
| Controller Temperature |
-20°C to 60°C |
| Installation |
Flexible / Cuttable |
| Application |
Cabinet / Wardrobe / Furniture / Interior |
| MOQ |
1pcs |
| Sample Lead Time |
3–7 Days |
| Mass Order Lead Time |
7–15 Days |
| OEM/ODM |
Available |
Project Applications
Kitchen Cabinet Lighting
The flexible 12V COB strip can be installed beneath or inside kitchen cabinets to provide adjustable white accent or task-oriented lighting.
Wardrobe Lighting
The compact flexible strip is suitable for wardrobes, closets and furniture interiors where low-profile linear illumination is required.
Display Cabinet Lighting
The CCT function allows retailers and display designers to adjust the lighting appearance for different products.
Retail Lighting
The system can be used in shelves, counters and display furniture in retail stores.
Furniture Lighting
Furniture manufacturers can integrate the LED strip into cabinets, shelves, counters and custom furniture.
Hospitality Projects
Suitable for selected hotel, restaurant and hospitality furniture lighting applications.
Smart-Home Projects
The Zigbee controller enables the LED strip to become part of a compatible Zigbee smart-lighting environment.
Commercial Interior Lighting
The adjustable color temperature makes the system suitable for commercial interiors where lighting appearance needs to change according to the space.
H3 OEM/ODM
USKYLED supports OEM/ODM cooperation for smart lighting distributors, furniture manufacturers, cabinet manufacturers, lighting brands and project contractors.
Potential project customization may include:
- LED strip length
- CCT range
- PCB width
- Power configuration
- Controller configuration
- Connector
- Power supply
- Plug type
- Packaging
- Private labeling
- Brand logo
- Kit configuration
- Project-specific cable length
For furniture and cabinet manufacturers, the complete kit can be configured according to cabinet dimensions and installation requirements.
For B2B projects, buyers can provide:
- Required length
- Quantity
- Target voltage
- CCT range
- Controller requirements
- Plug standard
- Application
- Target market
MOQ: 1pcs
Sample Order Lead Time: 3–7 Days
Mass Order Lead Time: 7–15 Days, depending on configuration and order quantity.
CTA
Looking for a Smart Zigbee COB CCT LED Strip for your lighting project?
Contact USKYLED for samples, technical specifications, wholesale pricing and OEM/ODM support.
MOQ: 1pcs
Sample Lead Time: 3–7 Days
Mass Order Lead Time: 7–15 Days
For cabinet, wardrobe, furniture and commercial lighting projects, send us your required length, CCT range, quantity, plug type and smart-control requirements.
Request a Sample | Get Wholesale Pricing | Discuss OEM/ODM
