H2 Product Introduction
The Surface-Mounted Ceiling LED Aluminum Profile is an architectural LED profile designed for rooms without a suspended ceiling or for renovation projects where cutting slots into an existing ceiling is undesirable.
Instead of building a traditional gypsum ceiling line, this aluminum profile can be installed directly onto the finished surface with screws. Its integrated light groove provides a dedicated space for an LED strip, allowing the profile to create decorative ceiling lines, corner illumination, indirect lighting and wall-washing effects.
The product is manufactured from 6063-T5 aluminum alloy and supplied with a PC cover. The aluminum construction provides a practical alternative to conventional gypsum decorative lines, while the surface-mounted installation simplifies installation for renovation and retrofit projects.
H3 Design
The profile uses a slim architectural linear-lighting concept that combines the appearance of a ceiling decorative line with an integrated LED strip channel.
Its surface-mounted structure is particularly useful when there is no ceiling cavity available for recessed installation. It can also be used when a room has already been decorated and the installer needs to add indirect or decorative lighting without extensive ceiling modification.
The aluminum profile is designed to provide a clean transition between the architectural surface and the LED lighting channel.
The current product page lists multiple profile variants under the emitting-color/model selection, including A, B, C and D versions, with both white and black D variants shown. Exact structural differences between these model codes should be confirmed with USKYLED before publication as technical specifications.
H3 Main Features
Surface-Mounted Installation
The profile can be fixed directly to the surface with screws, making it suitable for rooms where recessed installation is difficult or where ceiling construction has already been completed.
6063-T5 Aluminum Construction
The profile uses 6063-T5 aluminum alloy, providing a rigid channel structure for architectural LED strip installations.
Integrated LED Strip Groove
The profile incorporates a light groove designed to accommodate an LED strip, allowing the aluminum channel to function as part of an indirect or decorative linear lighting system.
PC Diffuser
A PC cover is included to cover the lighting channel and provide a finished appearance.
Suitable for Renovation Projects
Because the profile is surface mounted, it can be considered for renovation projects where opening or cutting an existing ceiling is undesirable.
Easy to Clean
The aluminum construction provides a practical alternative to traditional gypsum ceiling lines in applications where easy surface maintenance is important.
LED Strip and Transformer Sold Separately
The product page clearly states that the LED strip and transformer are not included and need to be purchased separately.
H3 Application
This ceiling LED aluminum profile is suitable for:
- Residential ceiling lighting
- Living room indirect lighting
- Bedroom ceiling decoration
- Ceiling corner lighting
- Wall washing
- Decorative ceiling lines
- Backlighting
- Architectural linear lighting
- Interior renovation projects
- Commercial interior lighting
- Retail interior decoration
- Hospitality lighting
- Modern residential interiors
- Rooms without false ceilings
- Retrofit lighting projects
The original product page specifically positions the profile for rooms without ceilings, already-decorated homes and applications where additional lighting is required.
H3 Size / Options
Standard Length Options:
Current Package Information:
- 1m × 9pcs shown as the current product package option
Profile Color:
- White is specified on the product page
- D White and D Black variants are displayed among the current model options
Model / Variant Options:
Because the current page uses internal model codes such as A-4937, A-9723, B-9740 and C-9819, the structural dimensions and differences between these variants should be added to the page after engineering confirmation.
H3 Lighting Options
The profile is designed to work with separate LED strip lighting installed inside the integrated light groove.
Recommended lighting configurations can include:
- Single-color LED strips
- COB LED strips
- CCT LED strips
- Dimmable LED strips
- High-CRI LED strips
- RGB/RGBW LED strips
Important: The product page confirms that LED strips and transformers are not included. Therefore, specific voltage, wattage, LED density, CCT and CRI should be specified according to the selected LED strip rather than being presented as fixed specifications of the aluminum profile.
H3 Installation
Surface-Mounted Installation
- Measure and mark the installation position.
- Prepare the mounting surface.
- Position the aluminum profile.
- Fix the profile using suitable screws.
- Install the compatible LED strip inside the light groove.
- Connect the LED strip to the appropriate power supply.
- Install the PC cover.
- Test the lighting before completing the finishing work.
The product page states that screws are used for installation but that screws are not included for transportation safety.
Construction Note
Where putty is applied around the profile, the page recommends using reinforcing mesh in advance. Any construction adhesive accidentally deposited on the surface should be cleaned immediately to avoid surface damage.
H3 Technical Specifications
| Specification |
Details |
| Product Type |
Surface-Mounted LED Aluminum Profile |
| Main Application |
Ceiling and architectural linear lighting |
| Material |
Aluminum Alloy |
| Aluminum Grade |
6063-T5 |
| Cover Material |
PC |
| Standard Color |
White |
| Installation |
Surface Mounted |
| Length Options |
50cm / 100cm |
| Light Source |
LED Strip, sold separately |
| Transformer |
Not Included |
| LED Strip |
Not Included |
| Mounting Method |
Screw Fixing |
| Package Option Shown |
1m × 9pcs |
| Model Options |
A / B / C / D |
| Sample Order Lead Time |
3–7 days |
| Mass Order Lead Time |
7–15 days |
| MOQ |
1 pcs |
| OEM/ODM |
Available upon project confirmation |
H3 Project Applications
Residential Projects
Suitable for living rooms, bedrooms, corridors, dining areas and other residential spaces requiring indirect ceiling lighting.
Renovation Projects
The surface-mounted structure is useful for existing interiors where cutting a new recessed channel into the ceiling is not practical.
Commercial Interiors
Potential applications include retail stores, restaurants, hotels, offices and other commercial spaces where architectural linear lighting is required.
Architectural Lighting
The profile can be integrated into ceiling corners, decorative lines and wall-washing designs to create continuous linear illumination.
Interior Design Projects
Designers and contractors can combine the aluminum profile with different LED strip configurations to achieve direct, indirect or decorative lighting effects.
H3 OEM/ODM
USKYLED can support B2B customers with LED aluminum profile sourcing for residential, commercial and architectural lighting projects.
OEM/ODM discussions can cover:
- Custom profile configurations
- Custom profile lengths
- Project-based quantities
- LED strip matching
- Diffuser options
- Profile finish and color
- Packaging requirements
- Private-label requirements
- Lighting system integration
- Bulk wholesale orders
For custom projects, customers should provide drawings, required installation position, LED strip dimensions and estimated quantity so the engineering team can confirm compatibility and production requirements.
CTA
Looking for a Surface-Mounted LED Aluminum Profile?
USKYLED supplies LED aluminum profiles for architectural, residential and commercial lighting projects.
MOQ: 1 pcs
Sample Order Lead Time: 3–7 days
Mass Order Lead Time: 7–15 days
Contact USKYLED for:
- Project quotations
- Bulk wholesale pricing
- Custom profile requirements
- OEM/ODM solutions
- Sample orders
- LED strip matching
- Custom packaging
Send us your required length, profile type, LED strip size and project quantity to get a quotation.
