Product Introduction
The USKYLED Outdoor LED Wall Light is a modern linear wall-mounted lighting fixture designed for residential, hospitality and commercial exterior applications.
Its elongated profile provides a clean architectural appearance while delivering practical illumination along exterior walls, entrances, pathways and building facades. The fixture uses an 18W LED light source and is designed for direct hard-wired installation.
With IP65 waterproof protection, the wall light is suitable for outdoor environments exposed to rain, humidity and dust. The product page specifies a 50,000-hour lifespan and 90–260V operating voltage, making it suitable for a wide range of international lighting projects.
Design
The linear design creates a contemporary appearance that works well with modern architectural styles.
The fixture uses a combination of iron and acrylic, with a high-temperature painted surface available in black or white. Its elongated 80cm body can visually extend across walls and architectural surfaces without creating a bulky appearance.
The minimalist profile makes it suitable for modern villas, hotels, residential buildings, restaurants, commercial properties and exterior architectural projects.
Main Features
IP65 Waterproof Protection
The sealed construction provides IP65-rated protection against dust and water exposure, making the fixture suitable for outdoor wall lighting applications.
18W LED Light Source
The integrated 18W LED chip provides efficient exterior illumination for residential and commercial environments.
50,000-Hour Lifespan
The specified 50,000-hour lifespan helps reduce replacement frequency and maintenance requirements for long-term lighting projects.
Wide Voltage Compatibility
The product specification lists a 90–260V input voltage, allowing the fixture to be considered for a broad range of electrical systems. Final electrical compatibility should be confirmed for the destination market before ordering.
Modern Linear Profile
The 80cm elongated form provides a contemporary architectural lighting effect and works well on long exterior wall surfaces.
Direct Hard-Wired Installation
The fixture is designed for wall mounting and direct hard-wired electrical connection. Professional installation is recommended.
Application
The Outdoor LED Wall Light can be used for:
- Villa exterior walls
- Residential entrances
- Hotel facades
- Apartment buildings
- Restaurant exteriors
- Commercial buildings
- Porch and patio areas
- Garage entrances
- Driveways
- Stairway walls
- Garden walls
- Architectural facades
- Landscape structures
- Outdoor hospitality areas
Its linear design is particularly suitable for projects that require a clean and modern exterior lighting appearance.
Size / Options
Standard Product Size: 80 × 8 cm / 31.5 × 3.15 in
Base Size: 4.6 × 3 cm / 1.81 × 1.18 in
Available Colors:
Material:
Model: CT03
The product page also contains conflicting dimensional information in its marketing description, so the final production specification should be confirmed before bulk ordering.
Lighting Options
Standard Lighting:
- 3000K Warm White
- 18W LED
- 3250 lm specified output
- Downlight lighting method
- Approx. 15–20 m² illumination area
The current product specification lists 3000K Warm Light as the standard configuration. If different CCTs, wattages or lighting configurations are required for a project, please contact USKYLED for availability and customization.
Important: The current product page states that the wall light is not dimmable and is designed for direct wiring.
Installation
The Outdoor LED Wall Light is designed for wall-mounted installation with direct hard-wired electrical connection.
Recommended installation procedure:
- Confirm the mounting position and wall dimensions.
- Switch off the power supply before installation.
- Mark and prepare the mounting points.
- Install the mounting base securely.
- Connect the electrical wiring according to local electrical regulations.
- Mount and secure the LED wall light.
- Restore power and test the lighting fixture.
Professional electrician installation is recommended for outdoor electrical lighting projects.
For continuous exterior wall lighting, the original product page recommends approximately 6–8 feet spacing between fixtures, depending on the required lighting effect and project conditions.
Technical Specifications
| Specification |
Details |
| Product Type |
Outdoor LED Wall Light |
| Model |
CT03 |
| Application |
Outdoor / Exterior Wall Lighting |
| Installation |
Wall Mounted |
| Wiring |
Hard-Wired |
| Light Source |
LED |
| LED Power |
18W |
| Input Voltage |
90–260V |
| Luminous Flux |
3250 lm |
| Color Temperature |
3000K Warm Light |
| Waterproof Rating |
IP65 |
| Material |
Iron + Acrylic |
| Finish |
High-Temperature Painting |
| Available Colors |
Black / White |
| Lighting Method |
Downlight |
| Lifespan |
50,000 Hours |
| Illumination Area |
15–20 m² / 161.4–215.3 ft² |
| Product Size |
80 × 8 cm / 31.5 × 3.15 in |
| Base Size |
4.6 × 3 cm / 1.81 × 1.18 in |
| Dimmable |
No |
| Power Source |
AC / Corded Electric |
Project Applications
The Outdoor LED Wall Light is suitable for a wide range of residential and commercial lighting projects.
Residential Projects
- Modern villas
- Private houses
- Apartments
- Residential entrances
- Garages
- Porches
- Patios
- Garden walls
- Driveways
Hospitality Projects
- Hotels
- Resorts
- Restaurants
- Cafes
- Guesthouses
- Outdoor dining areas
Commercial Projects
- Retail buildings
- Office buildings
- Commercial facades
- Shopping centers
- Property developments
- Architectural projects
Landscape & Architectural Projects
The 80cm linear design can be used to emphasize architectural surfaces, exterior walls, pathways and landscape structures while maintaining a clean modern appearance.
OEM/ODM
USKYLED supports OEM and ODM lighting solutions for distributors, wholesalers, contractors, lighting brands and project buyers.
Customization options may include:
- Product dimensions
- Housing color
- Lighting power
- Color temperature
- LED configuration
- Packaging
- Product labeling
- Brand logo
- Project-specific specifications
For large projects, please provide the required quantity, destination market, voltage, CCT, installation environment and project specifications so the USKYLED team can recommend the appropriate configuration.
Mass Order Lead Time
Mass order lead time: 7–15 days
Actual production time may vary according to order quantity, product configuration and customization requirements.
Sample Order Lead Time
Sample order lead time: 3–7 days
Samples are available for project evaluation, lighting testing and quality confirmation before bulk purchasing.
MOQ
MOQ: 1 piece
USKYLED supports low-MOQ sample orders as well as larger B2B and project orders.
CTA
Looking for a reliable outdoor LED wall light supplier for your next lighting project?
Contact USKYLED for product specifications, samples, wholesale pricing, OEM/ODM options and project support.
MOQ: 1 PCS
Sample Lead Time: 3–7 Days
Mass Order Lead Time: 7–15 Days
Request a Quote → Contact USKYLED Today
