Product Introduction
The USKYLED High Voltage COB LED Strip Light is designed for lighting applications that require flexible linear illumination with an AC110V or AC220–240V input configuration.
Unlike conventional low-voltage LED strips that typically require a separate DC power supply, this high-voltage COB LED strip is designed around AC mains input configurations with US and EU plug options.
The product uses COB LED technology to create a continuous high-brightness lighting effect with reduced visible dark areas. It is specified at 10W/m and has a compact strip profile measuring approximately 11 × 7mm.
The LED strip is available in warm white, natural white and white color options, covering approximately 3000–3500K, 4000–4500K and 6000–6500K respectively.
The strip itself is rated IP65 and can be cut every 50cm. However, the current product specification specifically states that the plug is not waterproof, so outdoor installations must protect the plug and connection points from direct water exposure.
Design
The COB LED strip uses a flexible linear construction designed to follow straight or curved installation surfaces.
The COB configuration creates a more continuous visual lighting effect than conventional LED strips where individual LED points may be more visible.
The approximately 11 × 7mm strip profile provides a compact format for:
- Kitchen cabinets
- Shelves
- Furniture
- Decorative walls
- Architectural details
- Garden structures
- Commercial interiors
- Selected outdoor decorative installations
The product is available in long continuous length configurations from 10m up to 100m according to the current product variants.
Main Features
- High-voltage COB LED strip design
- AC110V US plug configuration
- AC220–240V EU plug configuration
- High-brightness COB illumination
- Reduced visible dark areas
- 10W/m power consumption
- IP65 LED strip protection
- Dimming option
- Switch option
- 11 × 7mm strip profile
- Cuttable every 50cm
- Flexible linear construction
- 3000–3500K warm white
- 4000–4500K natural white
- 6000–6500K white
- Long-length options from 10m to 100m
- Suitable for indoor and selected outdoor decorative lighting
These specifications are based on the current USKYLED product page.
Application
Kitchen Lighting
The high-voltage COB LED strip can be used for kitchen cabinet illumination, countertop accent lighting and decorative linear lighting.
Cabinet Lighting
The flexible strip format allows it to be integrated into cabinets, shelves and furniture where continuous linear illumination is required.
Garden Lighting
The IP65 LED strip can be used for selected garden and outdoor decorative applications when the plug and electrical connections are appropriately protected.
Decorative Lighting
The continuous COB appearance is suitable for decorative architectural details, furniture, walls, displays and other interior design applications.
Commercial Lighting
Long-length configurations can be considered for commercial interiors, retail decoration, hospitality environments and other projects requiring extended runs of flexible LED lighting.
Architectural Accent Lighting
The flexible format allows the product to follow architectural edges, decorative structures and selected linear details.
Furniture Lighting
The compact strip profile can be incorporated into furniture, shelves, cabinets and display structures.
Size / Options
The current product page provides multiple length configurations:
| Option |
Available |
| Length |
10m |
| Length |
15m |
| Length |
20m |
| Length |
25m |
| Length |
30m |
| Length |
35m |
| Length |
40m |
| Length |
50m |
| Length |
100m |
| Strip Width |
Approx. 11mm |
| Strip Height |
Approx. 7mm |
| Cutting Length |
Every 50cm |
Lighting Options
Warm White
3000–3500K
Suitable for bedrooms, hospitality interiors, decorative furniture and warm architectural environments.
Natural White
4000–4500K
Suitable for kitchens, cabinets, retail spaces, work areas and general interior lighting.
White
6000–6500K
Suitable for applications requiring a cooler white lighting appearance.
The exact color-temperature ranges are based on the current product specification.
Switch Version
The switch configuration provides straightforward on/off control for suitable applications.
Dimming Version
The dimming configuration allows brightness adjustment where variable light output is required.
The product page currently lists 220V EU switch, 220V EU dimming and 110V US dimming variants.
Installation
The product is designed for flexible surface installation.
Basic Installation Process
- Measure the required installation length.
- Determine the appropriate 50cm cutting position.
- Cut the strip at the designated cutting point.
- Clean and prepare the mounting surface.
- Install the LED strip using the supplied adhesive or mounting accessories according to the selected configuration.
- Connect the appropriate US or EU plug configuration.
- Check the lighting and control function before completing the installation.
The current specification states that the strip can be cut every 50cm.
Waterproof Installation Note
The LED strip itself is specified as IP65, but the product page explicitly states:
The plug is not waterproof.
Therefore, for garden or other outdoor installations, the plug, connector and power connection must be placed in a suitably protected location or otherwise protected against water ingress.
Technical Specifications
| Specification |
Details |
| Product Type |
High Voltage COB LED Strip Light |
| LED Technology |
COB |
| Input Voltage |
AC110V / AC220–240V |
| Plug |
US Standard Plug / EU Plug |
| Power |
10W/m |
| Strip Width |
Approx. 11mm |
| Strip Height |
Approx. 7mm |
| Color Temperature |
3000–3500K / 4000–4500K / 6000–6500K |
| Waterproof Rating |
IP65 for LED strip |
| Plug Waterproofing |
Plug is not waterproof |
| Cutting |
Every 50cm |
| Operating Temperature |
-20°C to 50°C |
| Length Options |
10m / 15m / 20m / 25m / 30m / 35m / 40m / 50m / 100m |
| Control Options |
Switch / Dimming |
| Installation |
Flexible surface installation |
| Main Application |
Indoor and selected outdoor decorative lighting |
Project Applications
Residential Projects
- Kitchen cabinet lighting
- Furniture lighting
- Shelf lighting
- Decorative wall lighting
- Home accent lighting
- Garden decoration
Commercial Projects
- Retail stores
- Restaurants
- Hotels
- Hospitality interiors
- Commercial furniture
- Display areas
- Architectural decoration
Outdoor Decorative Projects
For outdoor decorative applications, the IP65 strip can be considered where the electrical connection and plug are suitably protected.
Potential applications include:
- Garden edges
- Landscape decoration
- Outdoor architectural accents
- Covered outdoor spaces
- Decorative structures
The product should not be represented as a completely waterproof plug-and-play outdoor system because the current specification states that the plug is not waterproof.
Long-Run Lighting Projects
The availability of lengths from 10m to 100m makes this product relevant to projects where longer continuous runs are required.
OEM/ODM
USKYLED can support OEM and ODM requirements for high-voltage COB LED strip lighting projects.
Potential customization areas can be evaluated according to project requirements:
- Input voltage
- US / EU plug configuration
- Switch configuration
- Dimming configuration
- Color temperature
- Strip length
- Packaging
- Product labeling
- Logo
- Private label
- Installation accessories
- Project-specific specifications
For B2B projects, buyers can provide the target market, required voltage, strip length, CCT, control method, quantity and packaging requirements for quotation and technical confirmation.
B2B Order Information
MOQ: 1 pcs
Suitable for sample evaluation and small quantity orders.
Sample Order Lead Time: 3–7 days
Mass Order Lead Time: 7–15 days
Actual production lead time may vary depending on quantity, customization, packaging requirements and current production schedule.
CTA
Looking for a High Voltage COB LED Strip Light Supplier?
USKYLED supplies high-voltage COB LED strip lighting for wholesalers, distributors, lighting contractors, furniture manufacturers, interior designers and commercial lighting projects.
Request a sample or wholesale quotation for your project.
- MOQ: 1 pcs
- Sample Order Lead Time: 3–7 days
- Mass Order Lead Time: 7–15 days
- AC110V US plug option
- AC220–240V EU plug option
- IP65 LED strip
- Switch and dimming options
- 10m–100m length options
- OEM/ODM support
Contact USKYLED for samples, wholesale pricing and project requirements.
Specifications:
- This product is COB high voltage lamp strip, high brightness, no dark area, stable work, suitable for work decoration.
- Input voltage : AC:110V(US standard plug) AC220-240V(EU plug)
- Color: Warm white (3000-3500K)/ Natural White (4000-4500K)/ White (6000-6500K)
- Light beads: Upgrade the big chip than still bright
- Power : 10W/ m
- Light strip dimensions : W11 × h7mm
- Operating temperature : -20 ~ 50
- Waterproof class : IP65, plug is not waterproof pay attention to waterproof
- Cutting: 50 CM can be cut, can be cut according to demand for easy installation
- Package includes : 1 x 220vled strip 1x switch plug meter included (nano adhesive adhesive)
- Package includes : 1 x 220vled strip 1x dimming plug meter included (nano adhesive adhesive)
- Package includes : 1 x 110vled strip 1x dimming plug meter included (2 clips 2 screws)
