Product Introduction
The 3W LED Emergency Exit Sign is an illuminated safety sign designed to identify emergency exits and support evacuation guidance in commercial and public buildings.
The product combines a 3W LED light source with an internal rechargeable battery system. According to the current product specification, the battery is a 2.4V 300mAh nickel-cadmium battery, the charging time is approximately 24 hours, and the stated emergency operating time is 90 minutes.
The exit sign is available in red and green configurations, with single-sided and double-sided options shown on the product page. This allows the same product platform to be configured for different building layouts and viewing directions.
It is suitable for emergency lighting systems in hotels, shopping malls, schools, hospitals, stations, entertainment venues and other public buildings.
Design
The product uses an illuminated exit-sign format designed for clear visual identification during normal building operation and emergency evacuation.
Available configurations include:
- Red single-sided
- Red double-sided
- Green single-sided
- Green double-sided
The single-sided version can be used where the sign is viewed primarily from one direction, while the double-sided configuration can be considered for corridors, passageways and other locations where occupants may approach from opposite directions.
The housing uses thermoplastic / thermoplastic ABS material according to the current product specification.
Main Features
3W LED Light Source
The product uses a 3W LED light source for illuminated emergency exit indication.
90-Minute Emergency Operation
The current specification states an emergency operating time of 90 minutes, providing backup illumination after normal power interruption.
24-Hour Charging
The product specification lists a charging time of approximately 24 hours for the internal rechargeable battery.
Rechargeable Ni-Cd Battery
The emergency backup system uses a 2.4V 300mAh nickel-cadmium battery according to the current product page.
Red and Green Options
The product page provides both red and green emission/sign options, allowing different exit-sign configurations according to project requirements.
Single-Sided and Double-Sided Designs
Single-sided and double-sided configurations are available for different installation locations and viewing directions.
Commercial Emergency Lighting
The product is intended for building emergency lighting systems and can be used in hotels, schools, shopping malls, hospitals, stations and other public facilities.
Application
The LED Emergency Exit Sign is suitable for:
- Hotels
- Shopping malls
- Schools
- Hospitals
- Supermarkets
- Railway and transport stations
- Entertainment venues
- Office buildings
- Commercial buildings
- Public buildings
- Corridors
- Stairways
- Emergency exits
- Fire escape routes
- Evacuation passageways
The current product page specifically identifies hotels, shopping malls, schools, hospitals, stations, entertainment venues and public buildings as application environments.
Size / Options
Current product options shown on the page include:
| Option |
Specification |
| Product Type |
LED Emergency Exit Sign |
| Power |
3W |
| Sign Color |
Red / Green |
| Sign Structure |
Single-Sided / Double-Sided |
| Light Source |
LED |
| Battery |
2.4V 300mAh Ni-Cd |
| Emergency Time |
90 Minutes |
| Charging Time |
24 Hours |
| Housing Material |
Thermoplastic / Thermoplastic ABS |
| Quantity Option |
2PCS |
For projects requiring specific sign dimensions, mounting methods, graphics, battery specifications or regional safety-sign formats, confirm the final configuration before production.
Lighting Options
The product is primarily designed for illuminated emergency exit indication.
Available sign configurations include:
- Red exit sign
- Green exit sign
- Single-sided exit sign
- Double-sided exit sign
Typical functions include:
- Emergency exit identification
- Fire escape indication
- Evacuation route guidance
- Corridor exit indication
- Stairway safety indication
- Public-building emergency signage
For projects requiring a specific arrow direction, EXIT wording, safety symbol or regional sign standard, the required configuration should be confirmed before production.
Installation
The emergency exit sign should be installed where it can be clearly seen by people using the building or evacuation route.
Typical installation locations include:
- Emergency exits
- Stairway entrances
- Stair landings
- Corridors
- Hotel passageways
- Shopping mall corridors
- School buildings
- Hospital passageways
- Public building entrances
- Fire escape routes
Recommended installation process:
- Determine the emergency exit or evacuation location.
- Select single-sided or double-sided configuration according to the viewing direction.
- Select the required red or green sign configuration.
- Confirm the electrical specification of the final product.
- Secure the fixture using the appropriate mounting hardware.
- Connect the product according to the final wiring instructions.
- Allow the battery to complete its charging cycle.
- Test the emergency function by interrupting the normal power supply.
- Confirm that the exit sign remains visible throughout the required evacuation route.
Installation should comply with applicable local electrical, fire-safety and emergency-lighting regulations.
Technical Specifications
| Specification |
Details |
| Product Type |
LED Emergency Exit Sign |
| Product Name |
Emergency Lighting |
| Light Source |
LED |
| Power |
3W |
| Sign Color |
Red / Green |
| Sign Configuration |
Single-Sided / Double-Sided |
| Emergency Time |
90 Minutes |
| Charging Time |
24 Hours |
| Battery Capacity |
2.4V 300mAh |
| Battery Type |
Nickel-Cadmium (Ni-Cd) |
| Housing Material |
Thermoplastic / Thermoplastic ABS |
| Usage |
Emergency Exit |
| Application |
Building Emergency Lighting System |
| Warranty |
1 Year |
| MOQ |
1 pcs |
| Sample Lead Time |
3–7 days |
| Mass Order Lead Time |
7–15 days |
Project Applications
Hotel Emergency Lighting Projects
Suitable for:
- Hotel corridors
- Guest floors
- Stairways
- Emergency exits
- Fire escape routes
- Public passageways
Shopping Mall Projects
Suitable for:
- Retail corridors
- Shopping areas
- Staircases
- Emergency exits
- Service passages
- Public areas
School & Education Projects
Suitable for:
- School corridors
- Stairways
- Campus buildings
- Classrooms and public areas
- Emergency exits
Hospital Projects
Suitable for:
- Hospital corridors
- Staircases
- Emergency routes
- Public passageways
- Building exits
Transportation Projects
Suitable for:
- Stations
- Transport buildings
- Passenger passageways
- Emergency exits
- Public evacuation routes
Public Building Projects
Suitable for:
- Government buildings
- Community facilities
- Public halls
- Commercial complexes
- Entertainment venues
- Other public facilities
OEM/ODM
USKYLED supports OEM and ODM cooperation for LED emergency exit signs and commercial emergency lighting projects.
Possible customization areas can include:
- Sign color
- Exit graphics
- Arrow direction
- Single-sided / double-sided configuration
- Product dimensions
- LED power
- Battery capacity
- Emergency operating time
- Input voltage
- Housing material
- Mounting method
- Product labeling
- Packaging
- Private-label production
- Project-specific configurations
For OEM/ODM projects, customers can provide the required sign design, electrical specification, installation environment and estimated order quantity for technical confirmation.
MOQ: 1 pcs
Sample Order Lead Time: 3–7 Days
Mass Order Lead Time: 7–15 Days
CTA
Looking for LED emergency exit signs for hotels, schools, shopping malls or public-building projects?
Contact USKYLED for samples, wholesale pricing and OEM/ODM emergency exit lighting solutions.
MOQ: 1 pcs
Sample Lead Time: 3–7 Days
Mass Order Lead Time: 7–15 Days
DM us for product specifications, samples and bulk pricing.
