Product Introduction
USKYLED TW-NR25 is a 25mm round LED neon flex designed for lighting features that are viewed from multiple directions. Its 360° light-emitting profile creates a continuous illuminated line around the tube, making it a useful choice for suspended curves, decorative loops and sculptural installations.
The flexible silicone body gives designers room to work beyond straight lines. Use it to develop a flowing feature above a reception desk, a curved lighting element in a retail display or a decorative installation in a hospitality interior.
This model operates on 24V DC and is supplied in a standard 5m roll. Its IP67-rated construction supports projects requiring a protected light body, with installation details and connection sealing selected to suit the site.
Design
The round 25mm profile gives the light a consistent visual presence when seen from different angles. This is particularly useful for suspended installations, where a flat or single-sided light source may expose an unlit surface.
The silicone housing forms a diffused luminous tube that can follow curves within the product’s bending limits. Product images show wave-shaped arrangements, loose curves and a circular pendant application, illustrating different ways to incorporate the light into a design.
The neon flex is a lighting component. Suspension hardware, mounting supports, power supplies and connections should be specified as part of the complete installation.
Main Features
- 360° illumination: A round light-emitting profile for installations viewed from multiple directions.
- 25mm outside diameter: A defined tubular form for decorative lighting features.
- Flexible silicone body: Suitable for curved layouts within the approved bending limits.
- 24V DC operation: Designed for use with a compatible 24V DC power supply.
- IP67-rated construction: A protected light body for appropriately specified installations.
- 5m standard roll: A practical starting format for project planning and fabrication.
- White option listed: Confirm the required color temperature before ordering.
- Sample-friendly ordering: MOQ of 1 piece for evaluation before bulk procurement.
Application
The TW-NR25 can be considered for:
- Decorative pendant lighting in restaurants and cafés.
- Hotel lobby and reception features.
- Retail window and showroom displays.
- Curved architectural accents.
- Exhibition and event installations.
- Sculptural lighting in residential interiors.
For outdoor projects, confirm the suitability of the complete assembly, including cable entries, end seals, mounting hardware and power supply location.
Size / Options
The standard product has a 25mm outside diameter and a 5,000mm roll length.
| Option |
Details |
| Model |
TW-NR25 |
| Outside diameter |
25mm |
| Standard length |
5m per roll |
| Listed color option |
White |
| Listed accessories |
2 end caps |
| Custom dimensions |
Available for discussion; subject to technical confirmation |
For a custom layout, provide a drawing showing the required lengths, curves, support positions and cable exit locations. Confirm cutting intervals and finished dimensions before fabrication.
Lighting Options
The current product page lists a white option without a specific Kelvin value. Confirm the required white-light appearance before placing an order, especially when the neon flex will be installed alongside other luminaires.
For projects requiring dimming or integration with a lighting control system, request confirmation of the LED configuration, compatible driver and control method.
The standard listing does not establish RGB, RGBW, addressable pixel control, DMX or tunable-white functionality. These requirements should be reviewed separately.
Installation
Plan the layout and support positions before installing the neon flex. Keep curves smooth and avoid sharp folds, crushing or unsupported tension at cable connections.
The existing product description refers to a 200mm bending diameter. Confirm the permitted bending direction and minimum bend specification with USKYLED before finalizing a ring or curved feature.
Use a compatible 24V DC power supply. Driver capacity and feed positions must be selected using the confirmed power consumption per meter and permitted run length.
Only cut the product at approved cutting locations. Where the installation requires an IP67 assembly, use the specified end-sealing and connection method after any cutting or termination.
For suspended features, use suitable supports and mounting accessories. Check the completed lighting assembly before final installation.
Technical Specifications
| Parameter |
Specification |
| Product type |
Round flexible LED neon light |
| Model |
TW-NR25 |
| Item number |
3256809757596252 |
| Light source |
LED |
| Light emission |
360° |
| Outside diameter |
25mm |
| Standard dimensions |
Ø25mm × 5,000mm |
| Housing material |
Pure silicone |
| Input voltage |
24V DC |
| IP rating |
IP67, as listed |
| Listed color option |
White; exact CCT to be confirmed |
| Standard roll length |
5m |
| Listed accessories |
2 end caps |
| Packaging |
Anti-static bag and export carton |
| Warranty |
5 years, subject to applicable warranty terms |
| MOQ |
1 piece |
| Sample order lead time |
3–7 days |
| Mass order lead time |
7–15 days |
Project Applications
For designers, the round emitting surface is particularly useful when a lighting feature needs to remain visible from several viewpoints. A suspended curve above a reception counter, for example, may be seen from the entrance, seating area and upper floor.
For contractors and lighting fabricators, the key planning details are the finished shape, mounting method, cable routing and power distribution. A sample can help confirm the light appearance and assess how the tube behaves in the intended geometry.
For distributors, provide customers with a complete specification that includes power consumption, color temperature, cutting interval and compatible accessories. These details make it easier to select the correct components and prepare an accurate quotation.
OEM/ODM
Contact USKYLED to discuss custom dimensions and OEM/ODM requirements for your project. Send a drawing or reference image together with the required quantity, lighting appearance, installation environment and delivery destination.
Custom lengths, cable arrangements, mounting accessories, branding and packaging requests are subject to feasibility review. Customized products may have different minimum quantities and lead times from the standard model.
Request a Sample or Project Quotation
Planning a curved or suspended lighting feature? Send USKYLED your layout, required length and quantity to discuss the TW-NR25 and its installation requirements.
MOQ: 1 piece
Sample order lead time: 3–7 days
Mass order lead time: 7–15 days
