Product Introduction

The 12V Colorful COB LED Strip Light is a flexible linear lighting solution designed for decorative, display and customized lighting applications. Using COB LED technology, the strip integrates a high-density LED arrangement to create a more continuous light appearance with reduced visible dark spots compared with conventional low-density LED strip designs.

The strip is available in multiple colors, including red, yellow, pink, blue, green, ice blue, purple and other selectable options depending on configuration. It can be used for decorative lighting, furniture, cabinets, displays, vehicles, computers, televisions and DIY projects.

With a DC12V low-voltage input, 480 LEDs/m density and a rated power of approximately 5W/m, this COB LED strip is designed for compact applications where flexible installation and uniform illumination are important.

Design

The flexible PCB construction allows the strip to bend around corners and fit into narrow spaces. The slim profile helps it remain visually discreet when installed inside cabinets, furniture, displays, decorative structures and other confined areas.

A self-adhesive backing is provided for convenient surface mounting. The strip can also be cut at 25mm intervals for DC12V configurations, allowing installers to create sections according to the required lighting length.

The current product page specifies a 4mm strip width in the technical description. Please verify whether the actual production width is 3mm or 4mm before publishing the final specification because the existing product title states 3mm.

Main Features

• DC12V low-voltage operation
• COB LED technology
• High-density 480 LEDs/m
• Approximately 5W/m rated power
• Continuous and uniform linear illumination
• Multiple color options
• Flexible and bending-resistant construction
• Cuttable every 25mm for 12V configuration
• Self-adhesive backing for easy mounting
• 180° beam angle
• Dimming support available
• More than 50,000 hours stated service life
• CE and RoHS certification stated on the product page
• IP20 indoor-use design
• Suitable for narrow installation spaces
• Available with 12V 2-pin wire or DC plug options

Application

This colorful COB LED strip is suitable for:

• Home decorative lighting
• Cabinet and shelf lighting
• Furniture lighting
• Display cabinet lighting
• Retail display lighting
• TV backlighting
• Computer and desk decoration
• Interior decorative lighting
• Car interior lighting
• Motorcycle and bicycle decoration
• DIY lighting projects
• Event and exhibition decoration
• Customized lighting products

Size / Options

Available length: 5m standard option

LED density: 480 LEDs/m

Cutting interval: 25mm for DC12V

Strip width: 4mm according to the current technical description; verify actual production specification before publication.

Connection options:

• 12V 2-pin wire
• 12V DC plug

For customized projects, contact USKYLED regarding available lengths, connectors, packaging and OEM requirements.

Lighting Options

Available color selections shown on the current product page include:

• Red
• Pink
• Blue
• Ice Blue
• Green
• Yellow
• Light Purple
• Orange
• 3000K
• 4000K
• 6500K

Color availability may vary by configuration.

The strip supports brightness control when used with a compatible dimmer.

Installation

The LED strip uses a self-adhesive backing for surface mounting.

Recommended installation process:

1. Measure the required lighting length.
2. Cut the strip only at the designated 25mm cutting points.
3. Clean and dry the installation surface.
4. Remove the protective film from the adhesive backing.
5. Mount the strip onto the prepared surface.
6. Connect the strip to a compatible DC12V power supply.
7. Check polarity before powering on.
8. Use a compatible dimmer when brightness control is required.

The product is rated IP20 and is not waterproof. For applications requiring additional protection, an appropriate silicone tube or profile should be considered.

Technical Specifications

Project Applications

For B2B lighting projects, the colorful COB LED strip can be integrated into:

Residential Projects

• Bedrooms
• Living rooms
• Kitchens
• Furniture
• TV walls
• Decorative shelving

Retail & Display Projects

• Display cabinets
• Product showcases
• Retail shelves
• Window displays
• Exhibition booths
• Brand displays

Hospitality Projects

• Hotel decorative lighting
• Bar interiors
• Restaurant decoration
• Lounge areas
• Entertainment spaces

Automotive & DIY Projects

• Car interior decoration
• Motorcycle decoration
• Bicycle projects
• Custom vehicle lighting
• DIY electronic projects

Furniture & OEM Projects

• Custom furniture
• Cabinets
• Decorative panels
• Display fixtures
• Customized lighting products

OEM/ODM

USKYLED supports OEM and ODM requirements for B2B lighting customers.

Customization can be discussed for:

• LED strip length
• Light color
• Connector type
• Cable configuration
• Packaging
• Product labeling
• Private-label requirements
• Customized lighting solutions
• Bulk order specifications

MOQ: 1 pcs for sample/testing orders.

Sample lead time: 3–7 days.

Mass order lead time: 7–15 days, depending on order quantity, customization requirements and production schedule.

For larger projects, customers can provide the required installation length, quantity, color, power configuration and application environment for quotation and technical confirmation.

CTA

Looking for a colorful COB LED strip light for your next lighting project?

Contact USKYLED for samples, bulk pricing and customized OEM/ODM solutions.

MOQ: 1 pcs

Sample Lead Time: 3–7 Days

Mass Order Lead Time: 7–15 Days

DM us for product specifications, samples and wholesale pricing.

Flexible,bending resistance

Self-adhesive tape on strip back, easy to mount anywhere